Change-over Library

The change-over library notes all the information on the different components or Base Circuits (=BC) available in Hysopt.

The following sections are available:

• Design mechanism

• Production systems

• Thermal storage

• Change-over systems

• Pumps for change-over, which can only be connected to change-over pipes.

  • Same as thehttps://hysopt.atlassian.net/wiki/spaces/HRM/pages/3089205023 on the heating library. But only the supply and boiler feed pump are available.

• Distribution circuits for change-over, which can only be connected to change-over pipes.

  • Passive mixing circuit in change-over system

  • Pressure independent control valve (change-over)

  • Electronic Pressure independent control valve (change-over)

  • non-return valve on supply

  • non-return valve on return

• End-units for change-over

The information in the following pages is similar to that in the heating and cooling pages, which are linked below. Note that these specific base circuits can only be used when connected to change-over pipes.

• System peripheral